![background image](http://html.mh-extra.com/html/canon/saddle-finisher-t2/saddle-finisher-t2_service-manual_62388091.webp)
T-2-13
Jam Type
Sensor
Jam Condition
Code
Inlet delay
PI22
When the saddle inlet sensor (PI22) does not
detect paper after a prescribed time (distance)
has elapsed since receiving a saddle delivery
request from the Finisher.
1793
Inlet
stationary
PI22
When paper does not exit the saddle inlet sensor
(PI22) after feeding for a prescribed amount with
the feed motor (M1) after the saddle inlet sensor
(PI22) detected the leading edge of the paper.
17A3
Feeding
delay
PI18
When the 1st paper sensor (PI18) does not detect
paper after prescribed time (distance) has
elapsed since the saddle inlet sensor (PI22)
detected the leading edge of the paper.
1791
Feeding
stationary
PI18,PI19,
PI20
When paper does not exit the 1st paper sensor
(PI18), 2nd paper sensor (PI19), and 3rd paper
sensor (PI20) after feeding for a prescribed
amount with the feed motor (M1) after the 1st
paper sensor (PI18) has detected the leading
edge of the paper.
17A1
Delivery
delay
PI11
When delivery sensor (PI11) cannot detect the
paper after feeding the stack for a prescribed
amount with the paper folding motor (M2) after
completing paper pushing motion with the paper
pushing plate.
1792
Delivery
stationary
PI11,PI17
When stack does not exit the delivery sensor
(PI11) after feeding the stack for a prescribed
amount with the paper folding motor (M2) after
detecting the leading edge of the paper with the
delivery sensor (PI11).
When stack does not exit the vertical path paper
sensor (PI17) after feeding the stack for a
prescribed amount with the paper folding motor
(M2) after detecting the stack with the delivery
sensor (PI11).
17A2
Stitcher
staple
SW7,SW5
When stitch motors (M7/M6) are rotated
forward and the stitch home position sensors
(SW7/SW5) do not turn ON within 0.4 seconds
after they are turned OFF and the motors are
rotated backward and the sensors turn ON within
0.4 seconds.
1786
Summary of Contents for Saddle Finisher-T2
