Canon Saddle Finisher-T2, Service Manual

Page: 156 / 262

Chapter 3
3-54
F-3-217
2) Remove screw [1] and pull up the swing pressure
guide [2].
F-3-218
3) Remove two E rings [1] at the joint between the
swing unit and the return roller unit and then slide the
two return roller unit collars [2] inside.
4) Unhook the swing pressure rack [3] from the swing
unit center hook.
F-3-219
5) Remove the belt [1] from the gear [2], remove the
belt [3] from the gear [2] and gear [4], and pull out the
swing unit [5] from the delivery direction.
F-3-220
[2]
[1]
[1]
[2]
[1]
[3]
[1]
[2]
[1]
[2]
[5]
[4]
[3]
[1]
[2]