Canon S900 User Manual Download

Page: 62 / 179

Using the Printer with a Network

Printer Driver Functions (Macintosh)

Using the Printer with a Network

The printer can be used with an Ethernet network environment.
Follow the steps described below to connect the printer to the network.

■

Before Setting up the Printer

• Install the printer driver on each network computer that will use the printer.

For information on installation, refer to the

Quick Start Guide.

• Use a USB cable to connect the printer to the computer that will function as the print

server.

■

Printer Setup

To use the printer on a network, first set up the print server, then set up each client
machine.

• Print server setup procedure

Select Chooser in the Apple Menu.

Select Active in AppleTalk.

Select the S900 icon, then select the printer name in Connected to:.

Summary of Contents for S900




















































































































































































Search results

Summary of Contents for S900

Reviews:

Related manuals for S900

Brands by name

Popular brands

Canon S900, User Manual

Search results

Summary of Contents for S900

Reviews:

Related manuals for S900

Brands by name

Popular brands