manualshive.com logo in svg

Canon S900, User Manual

Share
Download
Canon S900 User Manual Download Page 106

Photo Paper Pro PR-101

106

Printing Media

• Be aware that some types of clear plastic folders and albums may cause the edges of 

the paper to turn yellow.

■

Printable Area

With some images the trailing edge of the image may be blurred if printing extends into 
the printable area. Canon recommends that you print within the printing area.

➡

Printing Area

Note

➤

For photograph and illustration data that you want to print with Borderless 
Printing, create the data by using the same size as the paper size, and 
paste the data so that it fills the editing screen without leaving any margins. 
If you are using an application that allows you to set margins, set the left, 
right, top, and bottom margins to 0 mm. For instructions on setting margins, 
refer to the user's manual for your application.

Summary of Contents for S900




















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands