ENG-10
This function provides image stabilization
appropriate for shooting conditions (such as
shooting still subjects and panning shots).
Set the image stabilizer switch to ON when you
want to use the Image Stabilizer.
z
Set the image stabilizer switch to OFF when
you are not going to use the Image Stabilizer.
6. Image Stabilizer
z
The Image Stabilizer cannot compensate for a
blurred shot caused by a subject that moved.
z
The Image Stabilizer may not be fully effective if
you shoot from a violently shaking vehicle or other
transportation.
z
The Image Stabilizer operates for about two
seconds after turning off the camera. Do not
detach the lens during that time. This may cause
the lens to malfunction.
z
When using a tripod, it is recommended that you
set the image stabilizer switch to OFF.
z
Even with a monopod, the Image Stabilizer will
be as effective as during hand-held shooting.
However, depending on the shooting conditions,
there are cases in which the Image Stabilizer
effect may be less effective.
z
When shooting a still subject, it compensates for
camera shake in all directions.
z
It compensates for vertical camera shake during
panning shots in a horizontal direction, and
compensates for horizontal camera shake during
panning shots in a vertical direction.
Summary of Contents for RF 24-70mm F2.8 L IS USM
Page 1: ...ENG Instructions ...