background image

ENG-14

Specifications

Focal Length/Aperture

24-70mm f/2.8

Lens Construction

15 groups, 21 elements

Minimum Aperture

f/22

Angle of View

Horizontal: 74°- 29°, Vertical: 53°- 19° 30’, Diagonal: 84°- 34°

Min. Focusing Distance

0.21 m/0.69 ft. (at 24 mm), 0.38 m/1.25 ft. (at 70 mm)

Max. Magnification

0.24x (at 24 mm), 0.30x (at 32 mm), 0.22x (at 70 mm)

Field of View

Approx. 157 x 103 mm/6.18 x 4.06 in. (at 24 mm, 0.21 m/0.69 ft.)

Approx. 158 x 106 mm/6.22 x 4.17 in. (at 70 mm, 0.38 m/1.25 ft.)

Filter Diameter

82 mm

Max. Diameter and Length

Approx. 88.5 x 125.7 mm/3.48 x 4.95 in.

Weight

Approx. 900 g/31.7 oz.

Hood

EW-88E

Lens Cap

E-82II

Case

LP1222

 

z

 The lens length is measured from the lens mount surface to the front end of the lens.  

Add 24.0 mm/0.94 in. when including the lens cap and dust cap.

 

z

 The maximum diameter, length and weight listed are for the lens itself only.

 

z

 Close-up Lens 250D/500D cannot be attached because there is no size that fits the lens.

 

z

 All data listed is measured according to Canon standards.

 

z

 Product specifications and appearance are subject to change without notice.

Summary of Contents for RF 24-70mm F2.8 L IS USM

















Reviews: