C4
CHAPTER 2 • Routine Operation
Enter a projector group name, and place a check mark beside necessary
2
projector parameter categories and enter its conditions for classification.
It will be a "Status group" if more than one condition is specified, and a "User group" if
none is specified.
Category
Description
Projector group
name
Enter a name within 40 one-byte characters.
Product name
E n t e r a p r o d u c t n a m e o f t h e p r o j e c t o r u s i n g o n e - b y t e
alphanumerical characters.
Projector name
Enter any name of a projector in two-byte or one-byte characters.
Location
Enter a location of the projector in two-byte or one-byte characters
Status
Select a status of the projector from "Disconnected", "Power off",
or "Power on".
Warning
Select a warning status of the projector from "Yes" or "No".
Lamp
Select a status of the lamp from "Normal", "Obtain a new lamp",
"Replace with the new lamp", "Obtain or replace with the new
lamp", or "Warning".
Lamp Time
(converted)
Select from "over" or "less than", and enter a number from 0 to
99999 for lamp usage time.
Filter
Select a status of the filter from "Normal", "Cleaning the air filter",
"Replacing the air filter" or "Cleaning or replacing the air filter".
Air filter time
Select from "over" or "less than" and enter a number from 0 to
99999 for air filter usage time.
Click [OK] when you have completed entering the conditions.
3
Projector group is now added in the Projector group list.