C0
CHAPTER 1 • Introduction
Configuring the Polling Interval Settings
1.4.3
Default polling interval for this software is set to "Not specified" for discovering projectors,
and "1 hour" for receiving status of the projector.
Change the polling interval with the following procedures.
Select [Polling interval settings] from the [Option] menu.
1
[Polling interval settings] dialog will display.
Select a polling interval from the pop-up menu beside [Get projector status
2
every] and [Discover projector every], and click [OK].
Category
Description
Get projector
status every
Select a polling interval from "10 minutes/15 minutes/30 minutes/1
hour/Not specified", for receiving status of the projector. If "Not
specified" is chosen, poll manually with [Refresh projector status]
from the [View] menu.
Discover
projector every
Select a polling interval from "1 hour/2 hour/3 hour/6 hour/12
hour/24 hour/Not specified", for discovering new projectors. If "Not
specified" is chosen, poll manually with [Discover projector] from the
[View] menu.
Note
Settings will be cancelled if [X] (Close) or [Cancel] button is clicked before
-
clicking the [OK] button.