User Command Specifications
9.Details of command GET BLANK
1
GET BLANK
GET BLANK
For all other responses, refer to
"Error List."
(1)
However, a "busy" response is given while the zoom or focus lens is being driven.
( Refer to the
ZCONTDRV command and FCONTDRV command.
)
(2) The BLANK setting can be controlled using the
BLANK command
.
> GET BLANK or ? BLANK
< g:BLANK=ON
*Commands are indicated by ">", and responses are indicated by "<".
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command States
OFF
ON
PM
-
-
-
×
○
×
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
○
○
X600
SX60
○
×
○
○
○
○
SX6
○
○
○
-
-
-
-
SX50
-
-
-
Remarks
D-RGB A-RGB1 A-RGB2
Comp
Video
S-Video D-Video SCART
None
Model Power supply
Input
Mode
Remote
Local
×
○
○
○
01.01**
?△BLANK
This command is used to inquire about the current BLANK status.
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
g:BLANK=<BLANK status:ID>
Commands
Function
Format
Description
Response
-
-
-
-
GET□BLANK
01.00**
01.01**
01.01**
BLANK release underway
SX60
X600
Setting
Control
Mode
BLANK status inquiry
Reference
SX50
SX6
Example
ID
BLANK status
Status
Commands
supported
ON
BLANK underway
OFF
PAGE 75