Canon RealIS SX6, User Manual, Page: 94 / 190

User Command Specifications ９．Details of command GET SHARP
1
GET SHARP
GET SHARP
GET
□
SHARP
?
△
SHARP
g;SHARP=<Sharpness setting: Number>
For all other responses, refer to "Error List."
-1
A "busy" response is given while the zoom or focus lens is being driven.
（
Refer to the ZCONTDRV command and FCONTDRV command.
）
-2 The sharpness can be set by the SHARP command.
> GET SHARP or ? SHARP
< g:SHARP=3
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
×
○
×
×
○
×
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
SX60 X600
○ ○ ○
– –
○ ○
SX50 SX6
Commands
Function
Format
Description
Response
This inquires about the current sharpness value setting.
Commands
supported
Sharpness value setting inquiry
01.01** 01.01** 01.01** 01.01**
○ ○ ○ ○
Model Power
Input Mode
Remote Local
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
SX50
○ ○ ○
×
SX6 ○ ○ ○ ○ ○ ○ ○ ○
×
○ ○
X600
SX60
Setting Reference
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
Example
Number
Mode Control
PAGE 86