Canon RealIS SX6 User Manual Download Page 70

Page: 70 / 190

User Command Specifications

9. Details of command GUID

GUIDE

GUIDE=<Guide setting parameter：ＩＤ>

Guide setting parameters

For details, refer to the

RANGE command

For all other responses, refer to

"Error List."

This command is used to set the guide function display to ON or OFF.

(1)

However, a "busy" response is given while the zoom or focus lens is being driven.

（ Refer to the

ZCONTDRV command and FCONTDRV command.

）

(2)

However, the guide is cleared immediately when "GUIDE=OFF" is received while the guide is displayed.

(3)

For details, refer to the

GET command

Setting

> GUIDE=ON

The guide display is set to ON.

< i:OK

Reference

> GET GUIDE or ?GUIDE

The guide display setting status is obtained.

< g:GUIDE=ON

Acquisition of parameters which can be set

> RANGE GUIDE
< r:GUIDE=I, OFF, ON

*Commands are indicated by ">", and responses are indicated by "<".

When a command is not supported, "e:0002 INVALID_COMMAND" is returned.

Supported Command States

OFF

－

○

*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.

Commands

supported

０１．００**

０１．０１**

X600

OFF

Guide display OFF

The parameters which can be set at any given point in time can be obtained using the
RANGE command.

It can be executed when the projector is in both the remote mode and power-on status at the same
time.

Mode

ＩＤ

Reference

Parameter Meaning

Control Setting

Guide setting

Guide display ON

Example

"i:OK" is returned if the parameter was set properly.

Response

This command functions in the same way as when "System settings" - "Guide" are selected on the
menu.

The current guide setting can be obtained using the GET command.

Commands

Function

Parameter

Description

Format

○

SX50

SX6

SX60

Model Power supply

Input

Mode

Remote

Local

Remarks

D-RGB A-RGB1 A-RGB2

Comp

Video

S-Video D-Video SCART

None

SX50

－

SX6

○

SX60
X600

PAGE 62

Summary of Contents for RealIS SX6































































































































































































Search results

Summary of Contents for RealIS SX6

Reviews:

Related manuals for RealIS SX6

Brands by name

Popular brands

Canon RealIS SX6, User Manual

Search results

Summary of Contents for RealIS SX6

Reviews:

Related manuals for RealIS SX6

Brands by name

Popular brands