Canon Puncher Unit-BF1, Service Manual

Page: 45 / 48

4
4
4-13
4-13
13
13) Install the supplied punch unit fixing pin, and then secure it with the suppied
screw (TP, M3 x 6).
x1
14
14) Connect the punch unit harness to the connector.
x1
15
15) Lace the punch unit harness through seven cable guides, and then attach the re-use band. Connect
the punch unit connectors to the two connectors (CN127 and CN128) on the finisher controller PCB.
x2
x7
16
16) Connect the punched waste paper full sensor harness connector
to the connector (CN4) on the punch controller PCB.
\
F-4-33 F-4-33
F-4-34 F-4-34
F-4-35 F-4-35
F-4-36 F-4-36