Canon Puncher Unit-BF1, Service Manual

Page: 30 / 48

3
3
3-7
3-7
8) Remove 1 screw and remove the punch unit lock pin.
x1
空
Note:
Hold the punch unit at the locations shown below.
The punch front cover is not attached when
removing the punch unit from the saddle finisher,
but the punch unit holding location is the same.
Do not hold the motor gear.
•
•
•
F-3-18 F-3-18
F-3-17 F-3-17
9) Remove the punch unit from the finisher.
F-3-19 F-3-19