Canon Puncher Unit-BF1, Service Manual

Page: 39 / 48

4
4
4-7
4-7
12
12) Install the supplied punch unit fixing pin, and then secure it with the sup
-
plied screw (Bind-head, M4 x 6).
x1
13
13) Connect the punch unit harness to the connector.
x1
14
14) Lace the punch unit harness through seven cable guides, and then attach the re-use band. Connect the
punch unit connectors to the two connectors (CN127 and CN128) on the finisher controller PCB.
x2
x7
15
15) Connect the punched waste paper full sensor harness
connector to the connector (CN4) on the punch controller
PCB.
F-4-15 F-4-15
F-4-16 F-4-16
F-4-17 F-4-17
F-4-18 F-4-18