Canon PowrShot G5 Page 96 Service Manual Download

Page: 96 / 161

3-48

CHAPTER 3. REPAIR INSTRUCTION

Personal
Computer

Power
Source

48.0cm

AutoFocus Chart (1)

CAMERA
BODY

Tripod

Click the “Optical Unit” button.

3.5.2 Optical Unit Adjustment

■

Tools Used

• Personal Computer

• INTERFACE CABLE IFC-300PCU

• SERVICE MANUAL (CD-ROM)

• AutoFocus Chart (2 types)

• ADJUSTMENT SOFTWARE

• Tripod

• Compact Power Adapter CA-560

• DIGITAL CAMERA SolutionDisk

• AC Cable

When the message on the right appears, go to 3.

1. Place the Auto Focus Chart (1) at 48.0cm away

from the front of the camera finder.
* Place the Auto Focus Chart on a plain color

wall or equivalent.

* Adjust the light so that the brightness of the

chart will be about EV8.5.

2. Adjust the position of the camera finely so that

the center of the Auto Focus Chart is aligned
with the center of the LCD.

3. Click the “ADJUST” button.

Summary of Contents for PowrShot G5


































































































































































Search results

Summary of Contents for PowrShot G5

Reviews:

Related manuals for PowrShot G5

Brands by name

Popular brands

Canon PowrShot G5, Service Manual

Search results

Summary of Contents for PowrShot G5

Reviews:

Related manuals for PowrShot G5

Brands by name

Popular brands