Canon PowrShot G5 Service Manual Download Page 84

Page: 84 / 161

3-36

CHAPTER 3. REPAIR INSTRUCTION

3.3 Before Starting Electrical Adjustments

3.3.1 TWAIN Driver Installation

Install the USB Driver for Adjustment in the CD-ROM to PC.
(“This Adjustment Software” is impossible when the RS-232C TWAIN driver is used.)

3.3.2 Factory Mode Driver Installation

After downloading and extracting Factory Mode Driver, double-click Setup.exe
(\Factory Mode Driver\Win 2000_98\Setup.exe) to install it.

If InstallShield Wizard appears as shown in the first picture below, install the TWAIN (Factory Mode)
Driver by following the instructions.

)

The InstallShield Wizard will install TWAIN
Driver on your computer.

Click the “??[N]>” button.

)

License Agreement

See the file “Service Manual/English/Ch6/
License.pdf” for the contents of the License.

Click the “??[Y]” button.

Summary of Contents for PowrShot G5


































































































































































Search results

Summary of Contents for PowrShot G5

Reviews:

Canon PowrShot G5, Service Manual, Page: 84 / 161

Search results

Summary of Contents for PowrShot G5

Reviews: