Canon PowrShot G5, Service Manual

Page: 90 / 161

3-42
CHAPTER 3. REPAIR INSTRUCTION
Personal
Computer
Power
Source
Brightness
Box
CAMERA
BODY
C-12 Filter
C-2 Filter &
Power
Source
Stand
Color Viewer
Personal
Computer
CAMERA
BODY
ND-4
Filter
4 1. Place the camera so that lens is set against the
light source surface of the Brightness Box via
the C-2 Filter and the C-12 Filter.
2. Set the Brightness Box to EV12.
3. Click the “Check” button.
4. Check the Brightness level if it is within
0 ± 5.
* If not, calibrate the Brightness Box until it
becomes within 0 ± 5.
5. Click the “NEXT” button.
5 1. When the message on the right appears, Set the
Brightness Box to EV15 and attach the ND-8
Filter while setting the C-2 Filter and the C-12
Filter between the lens.
2. Click the “Check” button.
3. Check the Brightness level if it is within
0 ± 5.
* If not, calibrate the Brightness Box until it
becomes within 0 ± 5.
4. Click the “NEXT” button.
6 When the message on the right appears go to 7.
7 1. Attach the ND-4 Filters between the Lens and
the Color Viewer.
2. Place the camera so that the lens is set against
the center part of the Color Viewer.
3. Click the “ADJUST” button.