Canon PowerShot SX500 IS User Manual Download Page 136

Page: 136 / 228

136

Still Images

Movies

Erasing Images

You can choose and erase unneeded images one by one. Be careful when

erasing images, because they cannot be recovered. However, protected

images (

132) cannot be erased.

Choose an image to erase.

Press the <

> buttons or turn the

> dial to choose an image.

Erase the image.

Press the <

> button.

After [Erase?] is displayed, press the

> buttons or turn the <

> dial to

choose [Erase], and then press the <

button.

The current image is now erased.

To cancel erasure, press the <

buttons or turn the <

> dial to choose

[Cancel], and then press the <

button.

COP

Summary of Contents for PowerShot SX500 IS





































































































































































































































Search results

Summary of Contents for PowerShot SX500 IS

Reviews:

Brands by name

Popular brands

Canon PowerShot SX500 IS, User Manual

Search results

Summary of Contents for PowerShot SX500 IS

Reviews:

Brands by name

Popular brands