Canon PowerShot SX500 IS User Manual Download Page 125

Page: 125 / 228

125

Viewing

Still Images

Checking the Focus

To check the focus of your shots, you can magnify the area of the image

that was in the AF frame at the time of shooting.

Access Focus Check.

Press the <

> button (

124).

A white frame is displayed where the AF

frame was when the focus was set.

Gray frames are displayed over faces

detected later, in Playback mode.

The portion of the image in the orange

frame is magnified.

Switch frames.

Move the zoom lever toward <

> once.

The screen at left is displayed.

To switch to a different frame when there

are multiple frames, press the <

button.

Zoom in or out, or view other

image areas.

As you examine the focus, use the

zoom lever to zoom in or out. Press the

> buttons to adjust the

display position.

Press the <

> button to restore the

original display in step 1.

COP

Summary of Contents for PowerShot SX500 IS





































































































































































































































Search results

Summary of Contents for PowerShot SX500 IS

Reviews:

Brands by name

Popular brands

Canon PowerShot SX500 IS, User Manual

Search results

Summary of Contents for PowerShot SX500 IS

Reviews:

Brands by name

Popular brands