Canon PowerShot SX500 IS User Manual Download Page 122

Page: 122 / 228

122

Still Images

Movies

Viewing

After shooting images or movies, you can view them on the screen as

follows.

Enter Playback mode.

Press the <

> button.

Your last shot is displayed.

Browse through your images.

To view the previous image, press

the <

> button or turn the <

> dial

counterclockwise. To view the next

image, press the <

> button or turn the

> dial clockwise.

Press and hold the <

> buttons to

browse through images quickly. Images

appear grainy at this time.

To access Scroll Display mode, turn the

> dial rapidly. In this mode, turn the

> dial to browse through images.

To return to single-image display, press

the <

> button.

To browse images grouped by shooting

date, press the <

> buttons in

Scroll Display mode.

Movies are identified by a [

] icon. To

play movies, go to step 3.

COP

Summary of Contents for PowerShot SX500 IS





































































































































































































































Search results

Summary of Contents for PowerShot SX500 IS

Reviews:

Brands by name

Popular brands

Canon PowerShot SX500 IS, User Manual

Search results

Summary of Contents for PowerShot SX500 IS

Reviews:

Brands by name

Popular brands