Canon PowerShot S1OO Getting Started Download Page 85

Page: 85 / 278

You can shoot with the flash turned off.

Press the

button.

Choose

Press the

buttons or turn the

dial to

choose

, then press the

button.

If the flash is raised, it will automatically
lower.

Once set,

will appear on the screen.

To turn the flash back on, follow the steps
above to choose

You can use the digital zoom to zoom up to approximately 20x maximum, and
capture subjects that are too far away for the optical zoom to enlarge.

Move the zoom lever toward

Hold the lever until zooming stops.

Zooming stops at the largest possible
zoom factor without image deterioration.

Turning the Flash Off

What if a flashing

appears?

When you press the shutter button halfway in low light conditions where camera
shake is likely, a flashing

will appear on the screen. Attach the camera to a

tripod to prevent it from moving.

Zooming In More Closely on Subjects

(Digital Zoom)

COP

Summary of Contents for PowerShot S1OO























































































































































































































































































Search results

Summary of Contents for PowerShot S1OO

Reviews:

Brands by name

Popular brands

Canon PowerShot S1OO, Getting Started

Search results

Summary of Contents for PowerShot S1OO

Reviews:

Brands by name

Popular brands