Canon PowerShot A40, User Manual

Page: 108 / 183

104
Connecting the Camera to a Printer
Two direct interface cables are included with Canon
printers having the direct print function. Use DIF-100
cable with the
mark on the connector when connecting
to this camera.
¡
If you plan to print out many prints in a single session, it
is recommended that you power the camera with AC
power (p. 146) or else load fully charged NiMH
batteries (p. 144) or unused alkaline batteries before
you begin.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
¡
Refer to the System Map included with this camera kit
for printer information.
¡
Please see your printer’s user guide for instructions on
loading paper and installing ink cartridges.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
1
Turn off the Camera.
2
Attach the power cable to the printer and
plug the other end into power supply. Or,
install the printer’s rechargeable battery.
¡
Depending on the type of printer you have, it may or may
not use rechargeable batteries. Refer to your printer’s
user guide.