Canon PowerShot A300, Service Manual

Page: 54 / 130

3-4
CHAPTER 3. REPAIR INSTRUCTION
Fig. 3-4 REAR COVER UNIT
2.2 REAR COVER UNIT
(1) REAR COVER UNIT
CAUTION
Before starting the removal, check that the LENS COVER is closed.
1. Remove the Lithium battery.
2. Remove the four screws of
a
.
Remove a single screw by rotating the CONNECTOR COVER in the direction of the arrow.
3. Remove the four screws of
b
by opening the SIDE COVER and the BATTERY COVER in the direction of
the arrow.
4. Open the REAR COVER UNIT in the direction of the arrow. Remove connection of the LCD FPC and the
MO FPC, and remove the REAR COVER UNIT. Remove the SIDE COVER at the same time.
NOTE1 (Assembling)
During assembling, check that the switch position is correct.
NOTE2 (Assembling)
During assembling, set the position of the REAR COVER UNIT.
NOTE1 (Assembling)
NOTE2 (Assembling)
CAUTION
(1)-1
BATTERY COVER
SIDE COVER
(1)-3
REAR COVER
UNIT
LCD FPC
MO FPC
(1)-4
(1)-2
(1)-2
(1)-2
(1)-2
(1)-1
LITHIUM BATTERY
(1)-2
CONNECTOR
COVER
(1)-4
REAR COVER UNIT
(1)-4
SIDE COVER
LENS COVER
a
a
a
(1)-2
a
(1)-3
Switch position check
Setting position during assembling
b
(1)-3
b
(1)-4
METAL
M1.7
(SELF TAP)
XA4-9170-607
6.0mm
b
SILVER
M1.7
(SELF TAP)
CD3-0443-000
4.0mm
a