Canon PowerShot A300 Service Manual Download Page 50

Page: 50 / 130

CHAPTER 3. REPAIR INSTRUCTION

CONTENTS

1. Before Starting the Repair Work ------------------------------------------------------------------------------------------------ 3-1

1.1 Precaution on Flash High Tension Circuit ------------------------------------------------------------------------------- 3-1
1.2 List of Tools ----------------------------------------------------------------------------------------------------------------- 3-1
1.3 List of Supplies -------------------------------------------------------------------------------------------------------------- 3-1
1.4 Flexible Connectors --------------------------------------------------------------------------------------------------------- 3-2

2. Disassembly/Assembly ----------------------------------------------------------------------------------------------------------- 3-3

2.1 Procedure --------------------------------------------------------------------------------------------------------------------- 3-3
2.2 REAR COVER UNIT, STRAP PLATE, LCD WINDOW ------------------------------------------------------------ 3-4
2.3 BACK LIGHT UNIT, LCD PANEL ------------------------------------------------------------------------------------- 3-5
2.4 BATTERY COVER -------------------------------------------------------------------------------------------------------- 3-6
2.5 FRONT COVER UNIT, CF COVER, BATTERY COVER SPRING ---------------------------------------------- 3-7
2.6 MICROPHONE, MICROPHONE BUSH ------------------------------------------------------------------------------- 3-8
2.7 MAIN PCB ASS’Y-(1) ----------------------------------------------------------------------------------------------------- 3-9
2.8 MAIN PCB ASS’Y-(2) --------------------------------------------------------------------------------------------------- 3-10
2.9 MAIN PCB ASS’Y-(3) --------------------------------------------------------------------------------------------------- 3-11
2.10 FLASH UNIT --------------------------------------------------------------------------------------------------------------3-12
2.11 M-S FPC ------------------------------------------------------------------------------------------------------------------- 3-13
2.12 RLS PCB ASS’Y ----------------------------------------------------------------------------------------------------------3-14
2-13 BATTERY (-) CONTACT, BATTERY (+) CONTACT ----------------------------------------------------------- 3-15
2.14 ELECT. CAPACITOR ---------------------------------------------------------------------------------------------------3-16
2.15 OPTICAL UNIT-(1) ------------------------------------------------------------------------------------------------------3-17
2.16 OPTICAL UNIT-(2) ------------------------------------------------------------------------------------------------------3-18
2.17 BATTERY LOCK PLATE, BATTERY LOCKER ------------------------------------------------------------------3-19
2.18 LITHIUM (+) CONTACT, LITHIUM (-) CONTACT ------------------------------------------------------------- 3-20
2.19 Screw List ----------------------------------------------------------------------------------------------------------------- 3-21

3. Adjustments -----------------------------------------------------------------------------------------------------------------------3-22

3.1 Replacement Parts and Adjustment Items ----------------------------------------------------------------------------- 3-22
3.2 Adjustment Tools ----------------------------------------------------------------------------------------------------------3-23
3.3 Before Starting Electrical Adjustments ---------------------------------------------------------------------------------3-24

3.3.1

TWAIN Driver Installation --------------------------------------------------------------------------------------3-24

3.3.2

Factory Mode Driver Installation -------------------------------------------------------------------------------3-24

3.3.3

Adjustment Software Installation -------------------------------------------------------------------------------3-26

3.3.4

Preparation -------------------------------------------------------------------------------------------------------- 3-27

3.3.5

Starting up the Adjustment Software ---------------------------------------------------------------------------3-28

3.3.6

Menu Window -----------------------------------------------------------------------------------------------------3-28

3.3.7

How to Use the Adjustment Software -------------------------------------------------------------------------3-28

3.4 Calibration ----------------------------------------------------------------------------------------------------------------- 3-29

3.4.1

Calibration -------------------------------------------------------------------------------------------------------- 3-29

3.5 Adjustment Procedure -----------------------------------------------------------------------------------------------------3-34

3.5.1

CCD Adjustment ------------------------------------------------------------------------------------------------- 3-34

3.5.2

Optical Unit Adjustment ---------------------------------------------------------------------------------------- 3-36

3.5.3

Imaging Process Adjustment ------------------------------------------------------------------------------------3-38

3.5.4

Color Adjustment -------------------------------------------------------------------------------------------------3-41

3.5.5

Pixel Dot Adjustment --------------------------------------------------------------------------------------------3-43

3.5.6

Flash Adjustment -------------------------------------------------------------------------------------------------3-45

3.5.7

Checking of sound recording/output ---------------------------------------------------------------------------3-47

Summary of Contents for PowerShot A300



































































































































Search results

Summary of Contents for PowerShot A300

Reviews:

Related manuals for PowerShot A300

Brands by name

Popular brands

Canon PowerShot A300, Service Manual

Search results

Summary of Contents for PowerShot A300

Reviews:

Related manuals for PowerShot A300

Brands by name

Popular brands