Canon PowerShot A1400 Extended User Manual Download Page 133

Page: 133 / 229

133

Contents

Chapter Contents

•

Protected images on a memory card will be erased if you

format the card (

149

151

•

Protected images cannot be erased using the camera’s erasure

function. To erase them this way, first cancel protection.

Choosing Images Individually

Choose [Select].

Following step 2 in “Using the

Menu” (

132

), choose [Select]

and press the <

> button.

Choose an image.

Press the <

> buttons to

choose an image, and then

press the <

> button. [ ] is

displayed.

To cancel selection, press the

> button again. [ ] is no

longer displayed.

Repeat this process to specify

other images.

Protect the image.

Press the <

> button.

A confirmation message is

displayed.

Press the <

> buttons to

choose [OK], and then press the

> button.

Summary of Contents for PowerShot A1400






































































































































































































































Search results

Summary of Contents for PowerShot A1400

Reviews:

Related manuals for PowerShot A1400

Brands by name

Popular brands

Canon PowerShot A1400, Extended User Manual

Search results

Summary of Contents for PowerShot A1400

Reviews:

Related manuals for PowerShot A1400

Brands by name

Popular brands