Canon PowerShot A1400 Extended User Manual Download Page 129

Page: 129 / 229

129

Contents

Chapter Contents

Image Viewing Options

Still Images

Magnifying Images

Magnify an image.

Moving the zoom lever toward

> will zoom in and magnify

the image, and [

] is

displayed. You can magnify

images up to about 10x by

continuing to hold the zoom

lever.

To zoom out, move the zoom

lever toward <

>. You can

return to single-image display

by continuing to hold it.

Move the display

position and switch

images as needed.

To move the display position,

press the <

buttons.

While [

] is displayed, you

can switch to [

] by pressing

the <

> button. To switch to

other images while zoomed,

press the <

> buttons.

Press the <

> button again to

restore the original setting.

Approximate Position

of Displayed Area

Summary of Contents for PowerShot A1400






































































































































































































































Search results

Summary of Contents for PowerShot A1400

Reviews:

Related manuals for PowerShot A1400

Brands by name

Popular brands

Canon PowerShot A1400, Extended User Manual

Search results

Summary of Contents for PowerShot A1400

Reviews:

Related manuals for PowerShot A1400

Brands by name

Popular brands