Canon pmn Advanced User'S Manual Download Page 49

Page: 49 / 131

oo
ting

To Cancel the Manual Focus

Press the

button.

Using the Manual Focus in Combination
with the Auto Focus (Safety MF)

First, manual focus is used to roughly focus, then from that focus
position the camera automatically focuses more accurately.

Depending on the shooting mode, pressing the

button

will switch between the setting items as follows:

Press the

button and adjust the focus.

The MF indicator shows approximate figures. Use them as a
shooting guideline only.

The manual focus cannot be used in the

and

modes.

(Rec.) Menu

[Safety MF]

[On]*/[Off]

Press shutter button halfway after focusing with the Manual
Focus function, the focus will be automatically fine tuned to
the most focused point.

You cannot change the AF frame setting while focusing
manually. Cancel the manual focus mode, then change the
AF frame setting.

Not available in

mode.

, , ,

, ,

Exposure compensation/

mode/Exposure compensation/

mode/

Shutter speed/Exposure compensation/

Aperture value/Exposure compensation/

Shutter speed/Aperture value/

Summary of Contents for pmn




































































































































Search results

Summary of Contents for pmn

Reviews:

Related manuals for pmn

Brands by name

Popular brands

Canon pmn, Advanced User'S Manual

Search results

Summary of Contents for pmn

Reviews:

Related manuals for pmn

Brands by name

Popular brands