Canon pmn Advanced User'S Manual Download Page 33

Page: 33 / 131

oo
ting

In this mode, the camera shoots continuously while the shutter
button is held down.
If you use the recommended memory card*

, you can shoot

continuously (smooth continuous shooting) at a set shooting
interval until the memory card is full (p. 117).

Recommended Memory Card:

Super high-speed SDC-512MSH memory card (sold separately)
to which low-level formatting (p. 25) is conducted immediately
before shooting.

• This reflects standard shooting criteria established by Canon. Actual

results may vary according to the subject and shooting conditions.

• Even if continuous shooting suddenly stops, the memory card may not be

full.

To Cancel Continuous Shooting

Follow procedure 1 to display

Continuous Shooting

Shooting Mode

FUNC. Menu

* (Drive Mode)

See Menus and Settings (p. 18).

* Default setting.

Shoot.

The camera will continue to record successive images while
the shutter button is held down. Recording will cease when
the shutter button is released.

The interval between shots lengthens when the built-in
memory of the camera fills.

If the flash is used, the interval between shots lengthens
because the flash must charge.

Summary of Contents for pmn




































































































































Search results

Summary of Contents for pmn

Reviews:

Related manuals for pmn

Brands by name

Popular brands

Canon pmn, Advanced User'S Manual

Search results

Summary of Contents for pmn

Reviews:

Related manuals for pmn

Brands by name

Popular brands