Canon PIXUS iP8600, Service Manual

Page: 17 / 38

<Service mode operation procedures>
1) With the printer power turned off, while pressing the Resume/Cancel button, press and hold the Power button. (DO NOT release the buttons. The LED lights
in green to indicate that a function is selectable.)
2) While holding the Power button, release the Resume/Cancel button. (DO NOT release the Power button.)
3) While holding the Power button, press the Resume/Cancel button 2 times, and then release both the Power and Resume/Cancel buttons. (Each time the
Resume/Cancel button is pressed, the LED lights alternately in orange and green, starting with orange.)
4) When the LED lights in green, press the Resume/Cancel button the specified number of time(s) according to the function listed in the table below. (Each time
the Resume/Cancel button is pressed, the LED lights alternately in orange and green, starting with orange.)
5) After the function (menu) is selected, press the Power button. The LED lights in green, and the selected function is performed. (When the operation
completes, the printer returns to the menu selection mode automatically.)
<Destination settings procedures>
In the destination settings mode, press the Resume/Cancel button the specified number of time(s) according to the destination listed in the table below, and press
the Power button.
Note: After setting the destination, confirm the model name in service test print or EEPROM information print.
[See 3.4. Verification Items, (1) Service test print, or (2) EEPROM information print.]
To the top
Time(s) LED Function Remarks
0 times Green
Power off
When the print head is not installed, the carriage returns and
locks in the home position.
1 time Orange
Service test print See 3-4. Verification Items, (1) Service test print.
2 times Green
EEPROM information print See 3-4. Verification Items, (2) EEPROM information print.
3 times Orange
EEPROM initialization
4 times Green
Waste ink counter resetting
5 times Orange
Destination settings
Proceed to the step 5), and follow the Destination settings
procedures.
6 times Green
Print head deep cleaning
7 times Green
CD-R test print Not used in servicing.
8 times Orange CD-R print position correction
(horizontal)
Not used in servicing.
9 times Green CD-R print position correction
(vertical)
Not used in servicing.
10 times or more
Return to the menu selection
Time(s) LED Destination
1 time Orange
Japan: iP8600
2 times Green Other than Japan, non-support of CD-R printing (A4): iP8500
3 times Orange Other than Japan, non-support of CD-R printing (LTR): iP8500 (LTR)
4 times Green Other than Japan, support of CD-R printing (A4): iP8500
5 times Orange Other than Japan, support of CD-R printing (LTR): iP8500 (LTR)
6 times or
more
Return to the menu selection
<Part 1: 3. REPAIR, 3-3 (4) to (7)>
1 - 12