Canon PIXMA TR7022 Online Manual Download Page 342

Page: 342 / 346

5100

Cause

Printer error has occurred.

What to Do

If you are printing, press the printer's

Stop

button to cancel printing, then turn off the printer.

Check the following:

• Make sure FINE cartridge holder motion is not impeded by protective material, jammed paper, etc.

Remove any impediment.

Important

• When clearing an impediment to FINE cartridge holder motion, be careful not to touch clear film

(A) or white belt (B).

If you soil or scratch this part by touching it with paper or your hand, it could damage the printer.

• Make sure the FINE cartridges are properly installed.

Press down the ink cartridge locking cover until it clicks into place.

Turn the printer back on.

If this does not solve the problem, contact your nearest Canon service center to request a repair.

342

Summary of Contents for PIXMA TR7022



























































































































































































































































































































































Search results

Summary of Contents for PIXMA TR7022

Reviews:

Canon PIXMA TR7022, Online Manual, Page: 342 / 346

Search results

Summary of Contents for PIXMA TR7022

Reviews: