manualshive.com logo in svg

Canon PIXMA TR7022, Online Manual, Page: 272 / 346

Share
Download
Canon PIXMA TR7022 Online Manual Download Page 272

Replacing a FINE Cartridge

For details on printing the nozzle check pattern, print head cleaning, and print head deep cleaning, see 

If Printing

Is Faint or Uneven

.

Check2

 Check the estimated ink levels in the FINE cartridges. When a FINE cartridge

runs out of ink, replace it with new ones.

Checking Ink Status on the LCD
Replacing a FINE Cartridge

Check3

 Is FINE cartridge installed properly?

• Check that there is no orange tape left on the FINE cartridge.

If the orange tape remains on the FINE cartridge, peel it off.

• If you do not close the ink cartridge locking cover correctly, ink may not be ejected correctly.

Open the scanning unit / cover to open the ink cartridge locking cover, and then close it.

Press down the ink cartridge locking cover until it clicks into place.

Note

• Printed colors may not match screen colors due to basic differences in the methods used to produce

colors. Color control settings and environmental differences can also affect how colors appear on the
screen. Therefore, colors of printing results may be different from those on the screen.

272

Summary of Contents for PIXMA TR7022



























































































































































































































































































































































Reviews:

No comments