manualshive.com logo in svg

Canon PIXMA TR7022, Online Manual, Page: 309 / 346

Share
Download
Canon PIXMA TR7022 Online Manual Download Page 309

6.

Make sure all jammed paper is removed.

If the paper tears when you pull out it, a bit of paper may remain in the printer. Check the following and
remove any remaining paper.

• Any paper left under the FINE cartridge holder?
• Any small bits of paper left in the printer?
• Any paper left in the left and right empty spaces (C) in the printer?

7.

Close scanning unit / cover gently.

To close the scanning unit / cover, hold it up once, and then take it down gently.

8.

Plug in the printer again and turn it back on.

All jobs in the print queue are canceled. Redo the printing.

Note

• When reloading the paper, make sure you are using suitable paper and loading it correctly.

309

Summary of Contents for PIXMA TR7022



























































































































































































































































































































































Reviews:

No comments