Canon PIXMA TR7022 Online Manual Download Page 270

Page: 270 / 346

Refer to the instruction manual supplied with the paper for detailed information on the printable side.

•

When copying, see also the sections below:

Check6

Is platen glass or glass of ADF dirty?

Clean the platen glass or the glass of ADF.

Cleaning Platen and Document Cover

Cleaning the ADF (Auto Document Feeder)

Note

• If the glass of ADF is dirty, black streaks appear on the paper as shown below.

Check7

Make sure original is properly loaded on platen or ADF.

When you load the original on the platen, load it with the side to be copied facing down.

When you load the original on the ADF, load it with the side to be copied facing up.

Loading Originals

Check8

Is copy source a printed paper by printer?

If you use a printout done by this printer as the original, print quality may be reduced depending on the condition
of the original.

Reprint from the computer if you can reprint from it.

270

Summary of Contents for PIXMA TR7022



























































































































































































































































































































































Search results

Summary of Contents for PIXMA TR7022

Reviews:

Canon PIXMA TR7022, Online Manual, Page: 270 / 346

Search results

Summary of Contents for PIXMA TR7022

Reviews: