Canon PIXMA MP830, Service Manual

Page: 59 / 85

(3) Fax report
<User report output>
The user report can be output manually by user operation, or automatically via the user data settings.
1) Reports manually output by user operation
2) Reports automatically output
- Multi activity report: Automatically output at the end of broadcast.
3) Reports automatically output via the user data settings
- Transmission report
- Reception report
- Activity report
Memo: The current ROM version (e.g. 1.01) is printed in the upper left of the user's data list. In troubleshooting, check the ROM version.
Note: If the machine is turned off by removing the power cord with image data remained in the memory, the image data will be erased.
However, the memory clear list will not be printed at next power-on.
<Service report output>
The service data setting status, communication report, and error information report can be output via the service data settings.
1) Reports for service use
<How to set SSSW>
1) In the user mode, press and hold the Stop/Reset button until the Alarm LED blinks 12 times in orange, then release the button.
2) "SERVICE MODE SERVICE MODE #1 BIT SWITCH" is displayed on the LCD to indicate the machine is in the SSSW mode.
3) Press the OK button. "SW#01 00000000" will additionally be displayed on the LCD.
4) Using the right or left cursor button, set bit 2 (the rightmost digit (LSB)) and bit 1 (the second digit from the right) to "1."
5) Press the OK button.
6) Press the Stop/Reset button.
7) Press the ON/OFF button to turn off the machine.
Report Operation
One-touch speed dialing list Press the FAX button, then Menu button. Using the right or left cursor button,
select
Print report/list , and the item desired, then press the OK button.
Coded speed dialing list
Group dialing list
User's data list
Activity report
Memory list
Report Operation
System data list In the user mode, press and hold the Stop/Reset button until the Alarm
LED blinks 13 times in orange, then release the button.
Transmission report (with service error code and dump
list) In service data #1 SSSW SW01, set bit 0 and bit 1 to "1." The service
error code and dump list will be added to the transmission report. For
details, see <How to set SSSW> below.
Reception report (with service error code and dump list) In service data #1 SSSW SW01, set bit 0 and bit 1 to "1." The service
error code and dump list will be added to the reception report. For
details, see <How to set SSSW> below.
1-53