Canon PIXMA MP830 Service Manual Download

Page: 51 / 85

2) The LF correction pattern for the selected paper is printed.

3) In the printout, select the Pattern No. in which streaks or lines (white or black) are the least noticeable, press the Stop/Reset button the same

number of time(s) as the selected Pattern No., then press the ON/OFF button.

Note:

- If plain paper other than the 6 kinds specified in the table in step 1) is used, select the Pattern No. 0 (zero), leave the Stop/Reset button

untouched, and press the ON/OFF button.

- Each time the Stop/Reset button is pressed, the Alarm LED and the COPY button light alternately, Alarm in orange and COPY in green.

- If the Stop/Reset button is pressed 3 times or more, then the ON/OFF button is pressed, the machine returns to the service mode menu

selection.

1-45

Summary of Contents for PIXMA MP830






















































































Search results

Summary of Contents for PIXMA MP830

Reviews:

Related manuals for PIXMA MP830

Brands by name

Popular brands

Canon PIXMA MP830, Service Manual

Search results

Summary of Contents for PIXMA MP830

Reviews:

Related manuals for PIXMA MP830

Brands by name

Popular brands