69
Troubleshooting
EN
GLIS
H
Re-setting the machine
The admin password set to the machine was forgotten
Changing the port name
Problem
Possible Cause and Measures
Re-setting the
machine
Restore the machine to the factory default and set up the machine
again. For details, see
“Printing and Initializing Network Settings” on
page 72
. For setup procedures, see
“Confirming the Setup
Environment” on page 19
.
Problem
Possible Cause and Measures
The admin password
was forgotten
Restore the machine setting to factory default. All settings previously
set will be lost after initialization. Set up the machine again to use it.
For details, see “Initializing using the Operation Panel” in
“Printing and
Initializing Network Settings” on page 72
.
Problem
Possible Cause and Measures
Changing the port
name
To change the port name, click [Set Port Name] in the [Setup Results]
dialog box.
The [Set Port Name] dialog box is displayed, where you specify the
port name. By changing the port name, you can change the name of
the machine. When you set up an additional computer to use the
machine whose port name you changed, the machine is displayed
with the changed port name.
When two or more computers are set up, the changed name is
displayed. When multiple computers or printers are present, this can
be used to change the name to one that is easy to remember.
Port Name
Port names should consist of alphanumeric characters and be no
longer than 24 characters (12 characters under Windows Me or
Windows 98), excluding the prefix. The port name includes the fixed
prefix “CNBJNP_”, which you do not need to enter.