17
Setting Up
EN
GLIS
H
Aligning the Print Head from the Operation Panel
This procedure is necessary to get the best print results.
The Print Head positions are automatically aligned.
When the pattern shown on step 3 is printed, the alignment is completed.
Be sure to align the Print Head to ensure print quality.
1
Open the Paper Support (A), then pull out the
extension.
Pinch and slide the paper guide (B) to the left end.
2
Load a few sheets of letter- or A4-size blank
paper with the print side facing UP into the
Auto Sheet Feeder.
Align the paper with the cover guide (A), then slide
the paper guide toward the left edge of the paper.
Note
Ensure the paper stack does not exceed the paper
limit mark (B).
(A)
(B)
(B)
(A)