55
Troubleshooting
EN
GLIS
H
Troubleshooting
Cause and measures on possible troubles in the setup procedure are explained here.
Troubles in setup/connections
z
“Cannot connect to the access point (the access point is not detected)” on page 56
•
“The target access point is not detected” on page 57
•
“Cannot connect to the target access point” on page 57
•
“Using the machine in a multiple access point setup” on page 58
z
“How to set a network key/network password” on page 58
•
“About Network Key (Windows)/Network Password (Macintosh)” on page 58
•
“How to set a WEP/WPA key” on page 59
z
“Cannot connect to the machine (the machine is not detected)” on page 60
•
“The machine is not detected” on page 60
•
“No printer is detected after the network settings are changed in Windows” on
page 61
z
“The following screen is displayed during setup” on page 61
•
“The [Access Points] dialog box is displayed during setup” on page 61
•
““An access point could not be detected” is displayed during setup” on page 63
•
““Printer could not be connected to the specified access point” is displayed during setup” on
page 63
•
““Another access point with the same SSID exists” is displayed during setup” on page 63
•
“The [Set Printer IP Address / Printer IP Address Setup] dialog box is displayed during setup”
on page 64
•
“The [Printer Network Setup] dialog box is displayed during setup” on page 66
•
“The [Enter Password / Password Input] dialog box is displayed during setup” on page 66
•
““You have connected the printer to an unsecured wireless network” is displayed during setup”
on page 67
•
““Communication with the Card Slot failed” is displayed during setup” on page 67
•
““The Card Slot is already mapped as Network Drive to this computer” is displayed
during setup” on page 68
•
““Cannot map any more drives, because all the drive letters are assigned” is
displayed during setup” on page 68
z
“Re-setting the machine” on page 69
•
“Re-setting the machine” on page 69
z
“The admin password set to the machine was forgotten” on page 69
•
“The admin password was forgotten” on page 69
z
“Changing the port name” on page 69
•
“Changing the port name” on page 69
z
“Troubles in the network setup of the Card Slot” on page 70
•
“Unable to determine whether the Card Slot is mounted” on page 70
•
“The available drive letter cannot be selected on the [Network Setup of the Card Slot]
dialog box” on page 70
Note
If you do not find a description for your trouble here, refer to “Troubleshooting” on the
User’s Guide
and
the
Network Guide
.