11
Setting Up
EN
GLIS
H
Setting Up
Turning on the Machine
1
Open the Document Cover (A), then slide the
Scanner Lock Switch to the release position
(B) to unlock the Scanning Unit.
2
After closing the Document Cover, connect
the power cord.
Connect one end of the power cord to the rear of
the machine (A), and the other end to the AC outlet.
Note
z
Please confirm bundled thing by the illustration printed on the flapped lid of the packing box.
z
Even though the machine is intended to be used on a wireless or wired LAN, it must be placed
temporarily near the computer to do the setup via a USB cable. Place the machine in the location where
you will use it over a wireless or wired LAN as instructed during setup.
z
Although wireless communication between rooms or floors is possible, the wireless communication
quality may become poor. The wall must be made of a material that allows radio waves to pass through.
If the wall material prevents communication, set the machine in the same room as the access point.
Warning
z
Never attempt to plug the power cord into the power outlet or unplug the power cord when your hands
are wet.
z
Never damage, modify, stretch, or excessively bend or twist the power cord. Do not place heavy objects
on the power cord.
z
Never use any power supply other than the standard power supply available in the country of purchase.
Using the incorrect voltage and frequency could cause a fire or electric shock.
z
Always push the plug all the way into the power outlet.
Note
If you do not intend to use the machine for a long period of time, unplug the power cord from the power
outlet after turning off the machine.
Caution
z
Make sure to unlock the Scanning Unit before
turning on the machine.
z
Before transporting the machine, always lock the
Scanning Unit by sliding the Scanner Lock Switch
to the lock position (C).
(B)
(A)
(C)
(A)