ENGLISH
Check
Is the machine connected to a network?
To check if the machine is connected to a network, print the
Network
Configuration Page
, then make sure that
Link Status
is set to
Active
. To print
the
Network Configuration Page
, press the
Maintenance
button 11 times to
display the screen shown to the right, then press the
Black
button or the
Color
button.
•
Make sure that you follow Check 1, 2, 3, 4 and 6 of "Connection Checklist" on page 11,
then click
Redetect
.
Check 2
Check 1
If the machine is not connected to a network, perform setup again by following the
procedures from "6 Set Up a Wireless Connection" in the printed manual:
Getting
Started
.
Check 3
Is the IP filtering feature enabled on the access point?
For details on how to check the settings of the access point, refer to the manual supplied with the
access point or contact its manufacturer.
•
The Machine is Not Displayed (Detected) on the
Detected Printers List
Screen
Glossary
DHCP function
•
IP address
•
A numerical identification assigned to each computer or network device connected to a network.
A function to automatically assign required information (IP address, etc.) to computers, printers or other
devices connected to the network.
Subnet mask
•
A number used to distinguish the network and host portions of an IP address.
Default gateway
•
A device required to connect to external networks.
Set the access point to accept the IP address of the machine.
For details on how to change the settings of the access point, refer to the manual
supplied with the access point or contact its manufacturer.
•
To check the IP address of the machine, print the
Network Configuration Page
,
then check
IP Address
. To print the
Network Configuration Page
, press the
Maintenance
button 11 times to display the screen shown to the right, then press
the
Black
button or the
Color
button.
•
Is the privacy separator feature enabled on the access point?
Disable the privacy separator feature.
Check 5
Check 4
For details on how to change the settings of the access point, refer to the manual supplied with
the access point or contact its manufacturer.
•
For details on how to check the settings of the access point, refer to the manual supplied with the
access point or contact its manufacturer.
•
When obtaining an IP address automatically, make sure that the DHCP function of the
access point is active.
For details on how to check the settings of the access point, refer to the manual supplied with the
access point or contact its manufacturer.
•
Enable the DHCP function of the access point, then click
Redetect
.
For details on how to change the settings of the access point, refer to the manual supplied with
the access point or contact its manufacturer.
•
