Canon PIXMA MP170, Service Manual

Page: 30 / 70

5) After the function (menu) is selected, press the Power button. The Power LED lights in green, and the selected
function is performed. (When the operation completes, the machine returns to the menu selection mode
automatically.)
<Destination settings procedures>
In the destination settings mode, press the Stop/Reset button the specified number of time(s) according to the
destination listed in the table below, and press the Power button.
Note: After setting the destination, be sure to initialize the EEPROM. The destination setting may not
be valid unless the EEPROM is initialized after destination settings.
Confirm the model name in the service test print or EEPROM information print.
3 times Orange (Alarm)
EEPROM initialization
4 times Green (Power) Waste ink counter
resetting
5 times Orange (Alarm)
Destination settings
Proceed to the following step 5), and follow
the Destination settings procedures.
6 times Green (Power) Print head deep
cleaning
11 times Orange (Alarm)
Button and LCD test
Proceed to the following step 5), and follow
the Button and LCD test procedures.
15 times Orange (Alarm) Waste ink amount
setting Proceed to the following step 5), and follow
the Waste ink amount setting procedures.
12 to 14
times, 16
times or
more
Return to the menu
selection
Time(s) LED indication Destination
0 times Green (Power) Return to the menu selection
1 time Orange (Alarm) Japan
2 times Green (Power)
KOR
3 times Orange (Alarm) USA / CANADA
4 times Green (Power)
EUR
5 times Orange (Alarm) AUS
6 times Green (Power)
ASA
7 times Orange (Alarm) CHN
8 times Green (Power)
TWN
9 times or
more
Orange (Alarm) Return to the destination settings mode
[See 3-4. Verification Items, (1) Service test print, or (2) EEPROM information print.]
1-23