Chapter 10
97
Troubleshooting
*1
To resume printing, you can press [OK] (MP180) / [Black] or [Color] (MP160) on the machine
instead of selecting [Continue].
Waste tank (ink absorber) full / Ink
absorber full
This error message indicates that the ink absorber is nearly full.
The machine has a built-in ink absorber to hold the ink used during
FINE Cartridge cleaning, for example.
You can continue printing by selecting Continue
*1
on the display on
your camera.
However, because printing is disabled once the ink absorber becomes
completely full and until the ink absorber is replaced, you are
recommended to contact a Canon service representative as early as
possible.
No ink
z
Prepare a new FINE Cartridge.
Select Continue
*1
in the display on your camera to resume printing.
z
Replace the FINE Cartridge and close the Scanning Unit.
If printing is in progress and you want to continue printing, press
[OK] (MP180) / [Black] or [Color] (MP160) with the FINE Cartridge
installed.
Then printing can continue under the ink out condition by selecting
Continue
*1
on the display on your camera.
Replace the empty FINE Cartridge immediately after the printing. The
machine may be damaged if printing is continued the ink out
condition.
z
The FINE Cartridge may not be the compatible with this machine.
Install the appropriate FINE Cartridge.
Printer error
An error requiring servicing might have occurred.
Disconnect the cable between the machine and the camera, turn OFF
the machine, and unplug the power cord of the machine from the power
supply. After a while, plug the power cord of the machine back in, turn
ON the machine, and then reconnect the camera to the machine. If the
same error occurs, contact a Canon service representative.
Error message on camera
Action
