manualshive.com logo in svg

Canon PIXMA MG5550 Series, Online Manual

Share
Download
Canon PIXMA MG5550 Series Online Manual Download Page 96

Note

•

The printer is not detected. Check the connection.

 may be displayed depending on the

computer you use.

Check1

 Make sure that the USB cable is securely plugged in to the machine and the

computer.

Check2

 Follow the procedure below to connect the machine and the computer

again.

1. Turn the machine off.

2. Unplug the USB cable from the machine and the computer, then connect it again.

3. Turn the machine on.

Check3

 If you cannot resolve the problem, follow the procedure below to reinstall the

MP Drivers.

1. Click 

Cancel

.

2. Click 

Start Over

 on the 

Installation Failure

 screen.

3. Click 

Exit

 on the "PIXMA XXX" screen (where "XXX" is your machine's name), then remove the CD-

ROM.

4. Turn the machine off.

5. Restart the computer.

6. Make sure that you have no application software running.

7. Insert the CD-ROM again, then install the MP Drivers.

•

In other cases:

Reinstall the MP Drivers.

If the MP Drivers were not installed correctly, uninstall the MP Drivers, restart your computer, and then
reinstall the MP Drivers.

Deleting the Unnecessary MP Drivers

If you reinstall the MP Drivers, install the MP Drivers with the Setup CD-ROM or install them from our
website.

Note

• If the installer was forced to be terminated due to a Windows error, the system may be in an

unstable condition and you may not be able to install the drivers. Restart your computer before
reinstalling.

96

Summary of Contents for PIXMA MG5550 Series

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands