manualshive.com logo in svg

Canon PIXMA MG5550 Series, Online Manual

Share
Download
Canon PIXMA MG5550 Series Online Manual Download Page 37

Paper Does Not Feed Properly/"No Paper" Error Occurs

Check1

 Make sure that paper is loaded.

Loading Paper

Check2

 Make sure of the following when you load paper.

• When loading two or more sheets of paper, flip through the paper before loading.

• When loading two or more sheets of paper, align the edges of the sheets before loading.

• When loading two or more sheets of paper, make sure that the paper stack does not exceed the paper load

limit.

However, proper feeding of paper may not be possible at this maximum capacity depending on the type of
paper or environmental conditions (either very high or low temperature and humidity). In such cases, reduce
the sheets of paper you load at a time to less than half of the paper load limit.

• Always load the paper in portrait orientation, regardless of the printing orientation.

• When you load the paper, load the paper with the print side facing DOWN and slide the paper guides to

align with the both sides of the paper.

Loading Paper

• When you load the paper, insert the paper stack until the leading edge touches the far end of the front tray.

Check3

 Check to see if the paper you are printing on is not too thick or curled.

Media Types You Cannot Use

Check4

 Make sure of the following when you load Hagakis or envelopes.

• If a Hagaki is curled, it may not feed properly even though the paper stack does not exceed the paper load

limit.

Load Hagakis with a zip code column toward the far end of the feeder.

• When printing on envelopes, refer to Loading Paper, and prepare the envelopes before printing.

Once you have prepared the envelopes, load them in portrait orientation. If the envelopes are placed in
landscape orientation, they will not feed properly.

Check5

 Is the feeder set properly?

Push the feeder so that the   mark on the front tray aligns with the   mark on the machine.

Check6

 Confirm that the media type and the paper size settings correspond with the

loaded paper.

Check7

 If multiple sheets of plain paper is fed from the machine, select the setting for

preventing double-feed of plain paper.

37

Summary of Contents for PIXMA MG5550 Series

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands