Canon Pixma MG3500 Series Online Manual Download Page 233

Page: 233 / 769

If you are using plain paper to print images with high intensity, the paper may absorb too much ink and become
wavy, causing paper abrasion.

Reduce the intensity setting in the printer driver and try printing again.

1. Open the printer driver setup window.

How to Open the Printer Driver Setup Window

2. On the

Main

sheet, select

Manual

for

Color/Intensity

, and then click

Set...

3. Drag the

Intensity

slide bar on the

Color Adjustment

sheet to adjust the intensity.

Check6

Is printing performed beyond the recommended printing area?

If you are printing beyond the recommended printing area of your printing paper, the lower edge of the paper
may become stained with ink.

Resize your original document in your application software.

Printing Area

Check7

Is the platen glass dirty?

Clean the platen glass.

Cleaning the Platen Glass and Document Cover

Check8

Is the paper feed roller dirty?

Clean the paper feed roller.

Cleaning the Paper Feed Roller

Note

• Cleaning the paper feed roller will wear the roller, so perform this procedure only when necessary.

Check9

Is the inside of the machine dirty?

When performing duplex printing, the inside of the machine may become stained with ink, causing the printout to
become smudged.

Perform the Bottom Plate Cleaning to clean the inside of the machine.

Cleaning the Inside of the Machine (Bottom Plate Cleaning)

Note

• To prevent the inside of the machine from stains, set the paper size correctly.

Check10

Set the time to dry the printed surface longer.

Doing so gives the printed surface enough time to dry so that paper smudged and scratched are prevented.

1. Make sure that the machine is turned on.

2. Open the printer driver setup window.

How to Open the Printer Driver Setup Window

3. Click the

Maintenance

tab and then

Custom Settings

4. Drag the

Ink Drying Wait Time

slide bar to set the wait time, and then click

5. Confirm the message and click

Summary of Contents for Pixma MG3500 Series


































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Pixma MG3500 Series

Reviews:

Related manuals for Pixma MG3500 Series

Brands by name

Popular brands

Canon Pixma MG3500 Series, Online Manual

Search results

Summary of Contents for Pixma MG3500 Series

Reviews:

Related manuals for Pixma MG3500 Series

Brands by name

Popular brands