S a v e M o n e y a n d I m p r o v e Y o u r P r i n t i n g
MIS Associates Inc 2901 Auburn Rd Auburn Hills, MI 48326 800-445-8296
http://www.inksupply.com Fax: 248-289-6013 Email: [email protected]
5.
Once the tubes are securely inserted into the right clip on the Bridge Bracket, you can allow
the remaining tube length to feed to the left hand beige clip, and clamp the tubing. This will
leave the remaining tube length at the left side of the printer ready to be trimmed for
connection to the bottle fittings.
6.
Un-web the tubes from the right end beginning at the white plug up to the right hand side of
the beige clip, so that each tube can be independently on to its bottle. The tubes are easily un-
webbed by just pulling them apart, no tools are required. Don't go too far.
You can now align the bottles on the left hand side of the printer. The order of the ink bottles
from front to back are,
Magenta - Light Magenta - Yellow - Black - Cyan - Light Cyan
7.
Installing the tubing on the bottles is easy. In the CFS kit you received a set of bottle caps
with tubes attached. Remove the caps that came on the ink bottles and replace them with the
caps that have the tubes installed. Be careful not to spill the ink.
If your system was pre-filled, cut the tubes just above the white plugs, save the plugs in a
