I.
Registration Roller Clutch
1) Remove the delivery unit according to
the instructions in the procedure for
removing the delivery unit (on page 3-
4).
2) Remove the delivery cover.
3) Remove the screw, tab, two connec-
tors and the clutch cover.
[1] Screw
[2] Tab
[3] Connector
[4] Clutch cover
Figure 3-211
4) Remove the three screws and the
delivery motor mount.
[1] Screw
[2] Delivery motor mount
Figure 3-212
5) Remove the E-ring and registration
roller clutch.
[1] E-ring
[2] Registration roller clutch
Figure 3-213
CHAPTER 3 MECHANICAL SYSTEM
3-10
COPYRIGHT © 1999 CANON INC.
CANON 2
×
500 SHEET PAPER DECK-C1 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[2]
[3]
[4]
[1]
[2]
[1]
[2]
[1]
