C.
Registration Roller
1) Remove the registration roller clutch
according to the instructions in the
procedure for removing the registra-
tion roller clutch (on page 3-10).
2) Remove the E-ring and bushing.
[1] E-ring
[2] Bushing
Figure 3-205
3) Remove the E-ring, gear, pin, bushing
and registration roller.
[1] E-ring
[2] Gear
[3] Bushing
[4] Registration roller
Figure 3-206
D.
Pick up roller, Pick up/Feeding
Roller, Separation Roller
1) Take hold of the roller knobs and pull
them out
[1] Pick up roller
[2] Pick up/Feeding roller
[3] Separation roller
Figure 3-207
[1] Pick up roller
[2] Pick up/Feeding roller roller/separa-
tion roller
Figure 3-208
CHAPTER 3 MECHANICAL SYSTEM
3-7
COPYRIGHT © 1999 CANON INC.
CANON 2
×
500 SHEET PAPER DECK-C1 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Replace the delivery roller and separa-
tion roller at the same time.
Caution
:
[2]
[1]
[2]
[3]
[4]
[1]
[1]
[2]
[3]
[1]
[2]
[3]
[1]
[2]
