4) Remove the connector and the paper
feed unit.
[1] Connector
[2] Paper feed unit
Figure 3-203
CHAPTER 3 MECHANICAL SYSTEM
3-5
COPYRIGHT © 1999 CANON INC.
CANON 2
×
500 SHEET PAPER DECK-C1 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[2]
[1]
1. When the paper feed unit is to be
replaced, first remove the Pick up
roller, Pick up/Feeding roller and
separation roller, to prevent them
from becoming smeared with
grease. Also, make sure that no
grease adheres to the delivery
guide.
2. When gears are replaced (Figure 3-
204), coat them with some grease to
reduce noise. The type of grease to
be used (only designated type of
grease can be used) and method of
application are shown below.
Grease
: Permalube SHV-2
Method of
application : Apply a small amount of
grease to three or more
consecutive sprockets of
the gear.
Caution
:
