manualshive.com logo in svg

Canon Oce VarioPrint 6000 MICR Series, Operation Manual, Page: 26 / 48

Share
Download
Canon Oce VarioPrint 6000 MICR Series Operation Manual Download Page 26

Transaction setups

Learn about transaction setups

What are transaction setups

A transaction printing setup is a set of attributes that is used for transaction printing. You can
create different setups, but only one setup can be loaded, which means it is active. The attributes
of the active transaction setup define the media, print delivery, and other properties of the
transaction print job. To view the transaction setups go to the Settings Editor and select
[Transaction printing]->[Transaction setups].

[5] [Transaction setups] menu

You can only load a transaction setup when transaction printing is offline.

NOTE

In PRISMAproduction you can attach a transaction setup to a job ticket. When the data stream

uses this job ticket, the attached transaction setup is automatically loaded for the next data

stream.

PDL and IPDS transaction setups

Only one transaction printing Printer Control Language (PDL) can be active at the printer: IPDS or
PCL.

It depends on the data stream if the IPDS or the PCL attributes of the transaction setup become
active.

[6] [Transaction setups] menu

Status of transaction setups

The list of transaction setups shows the status of the transaction setups.

[7] Status of transaction setups

Transaction setups

26

Chapter 2 - Transaction printing

Océ VarioPrint 6000 MICR line

Summary of Contents for Oce VarioPrint 6000 MICR Series

















































Reviews:

No comments